|Home |||Multicade |||Garden of Eden pinball! |||Machines in the Arcade |||Games |||About us |||Downloads |||Games2||
In this new page I am going to be posting my progress on my pinball machine.
My machine's theme will be The Garden of Eden.
At my school I have a deadline of May 8th 2015.
What I have done so far is:
for this build I will be posting pictures to prove my progress.
Here I am drilling holes for the metal pieces on the edges of my machine
Here I am drilling the holes to mount the metal peices.
Here is a picture of the incomplete cabinet.
Here is a picture of the wooden cabinet.
Of course, you need a mount for a power switch and a plug
Switch and plug mounted in.
Flippers mounted in.
Buttons and corresponding switches in along with launcher holes drilled in place.
plunger pulled back.
launchlane retaining wall.
other side of launchlane getting glued in.
outlane being put in.
almost finished out-lanes
givin' it guts
wiring it up.
making a common ground.
mounting in the arduino mega 2560, rs-485,power driver 16 board.
programing to test it out.
holes for the start button
more holes for the start button.
start button mounted in.
finished slingshot (without graphics)
return lanes are put in.
working on re-wiring the whole thing.
The operational machine.
the machine at night!
adding playfield stuff
adding the pop bumpers!!!
never have enough wires!
one more pop to go!
a more operational machine!
all the pops and drop targets!
Even more stuff is on the bottom!
More playfield hardware.
Putting in playfield inserts
*sigh* still more to do.
We must paint before we apply graphics!
Some of the graphics
hacking a 9volt @850mili-amp wall-wart
finishing up the playfield!
the maquee's backlighting
It works! First try!
A very beautiful machine.
last of the painting!
Last of the glueing!
adding led striplighting
It is finished!
A week before the exposition that is on May 8th, 2015.
© Kincaid Arcade 2013-2016